SAE 100 R15 Six Steel Wire Spiral Hydraulic Hose
High Pressure Hose for Heavy-Duty Shock Loads Anyone working in heavy machinery knows that reliable hydraulic lines keep machines running without unexpected stops. Our hose is manufactured to the SAE 100 R15 standard, built with six spiral steel wire layers for circuits under constant high...
- Product Introduction
High Pressure Hose for Heavy-Duty Shock Loads
Anyone working in heavy machinery knows that reliable hydraulic lines keep machines running without unexpected stops. Our hose is manufactured to the SAE 100 R15 standard, built with six spiral steel wire layers for circuits under constant high pressure and repeated pressure surges. Where standard four-spiral hoses tend to fail prematurely, this model holds steady through tough cycles.
Its six high-tensile spiral steel reinforcement delivers better shock resistance and extra impulse margin. For hydraulic system upgrades with heavy cyclic impact, R15 is a practical alternative to ordinary four-spiral hoses.

Material & Construction
A hydraulic hose carries all the circuit pressure. Raw material choice and winding workmanship directly decide how long it lasts out on site, not just the printed rating.
The inner tube uses oil-resistant synthetic rubber, formulated for petroleum-based hydraulic fluids. It resists swelling and ageing under continuous oil flow, stabilising fluid transfer and lowering unexpected downtime caused by hose failure.
Six layers of high-tensile steel wire are spirally wound to spread internal pressure evenly across the hose wall and raise its pressure capacity. Compared with wire braided hoses, spiral construction handles repeated impulse shocks much better over long running hours.
The outer cover is made of abrasion and weather-resistant synthetic rubber. It protects the hose from sharp debris, UV exposure and large temperature swings, all common causes of rubber degradation on outdoor job sites.
Overall Performance Specifications
All listed sizes carry a working pressure of 420 bar, test pressure 840 bar and minimum burst pressure 1680 bar.
01
Rated for 500,000 impulse cycles, it suits machinery running continuous pressure cycles day and night.
02
Operating temperature:
-40℃ ~ +121℃.
03
This hose is engineered for petroleum-based hydraulic oil.
04
If other fluids will be used, fluid compatibility testing is strongly recommended before installation.
05
Size Specification Table
| DN | lnch | Inside | Wire | Outside | Working pressure | Test pressure | Burst pressure | Bend radius | Weight | ||
| mm | Inch | Dash | mm | mm | mm | bar | psi | bar | bar | mm | kg/m |
| 10 | 3/8 | -6 | 9.5 | 18.9 | 22.5 | 420 | 6090 | 840 | 1680 | 150 | 0.76 |
| 12.5 | 1/2 | -8 | 12.7 | 22.1 | 26 | 420 | 6090 | 840 | 1680 | 200 | 0.98 |
| 16 | 5/8 | -10 | 15.9 | 25.5 | 30 | 420 | 6090 | 840 | 1680 | 230 | 1.1 |
| 19 | 3/4 | -12 | 19 | 30.4 | 35 | 420 | 6090 | 840 | 1680 | 265 | 1.35 |
| 25 | 1 | -16 | 25.4 | 38 | 42 | 420 | 6090 | 840 | 1680 | 330 | 2.3 |
| 31.5 | 0 1-1/4 | -20 | 31.8 | 45.9 | 50 | 420 | 6090 | 840 | 1680 | 445 | 3.6 |
| 38 | 0 1-1/2 | -24 | 38.1 | 52.4 | 57.5 | 420 | 6090 | 840 | 1680 | 530 | 4.75 |
| 51 | 2 | -32 | 50.8 | 66.5 | 71.5 | 420 | 6090 | 840 | 1680 | 680 | 6.9 |
Typical Applications
This R15 spiral hose is widely selected for mining equipment, large excavators, heavy hydraulic presses and offshore auxiliary hydraulic lines. It fits jobs with frequent pressure spikes, where downtime and hose replacement cost need to be kept under control.
Quality Control & Export Supply Support
For OEM buyers and clients placing repeat orders, consistent quality across batches matters greatly.
We confirm all critical specifications before production starts and inspect finished goods against agreed requirements before shipment.
Typical inspection items cover dimensional check, visual appearance review, pressure testing, material verification and packaging inspection.
If you require test certificates, material data sheets or other quality documents, let us know ahead of time.
All inspection procedures follow the production standard we agree upon.
We welcome bulk enquiries from industrial part importers, machinery dealers and wholesalers.
For large orders, we can negotiate custom specs, roll lengths, packaging, marking and shipment schedules.
MOQ, sample availability, lead time and sales terms will be confirmed case by case based on the item and order volume.
For overseas orders, we coordinate specification confirmation, packaging updates, production progress and shipping plans to keep your procurement running smoothly.
It helps us a lot if you share the destination country and your estimated order quantity, so we can check relevant compliance, arrange production and work out logistics accordingly.
Frequently Asked Questions
Q: What separates SAE 100 R12 from R15?
A: Both share the same working pressure rating, but reinforcement differs. R12 has four spiral steel layers while R15 has six.
R12 works fine for steady high-pressure circuits. R15 shows its strength when the system sees continuous, frequent impulse shocks.
Q: Can you supply cut-to-length hose assemblies?
A: Yes. We supply bulk hose rolls, and we also cut, crimp and fit matched hydraulic fittings.
Finished assemblies arrive ready for installation.
Q: What shelf life can we expect?
A: If stored properly indoors, away from direct sunlight, heat and heavy stacking, the recommended maximum shelf life is 6 years.
We follow standard rubber hose storage rules for our stock.
Even so, we advise ordering according to your actual schedule instead of long-term stockpiling.

If you are sourcing high-pressure hydraulic hoses that withstand frequent impacts and reduce replacement frequency, our SAE 100 R15 is worth considering. We can provide professional selection advice based on your working conditions and support custom packages for your project. Feel free to get in touch.
Hot Tags: sae 100 r15 six steel wire spiral hydraulic hose, China sae 100 r15 six steel wire spiral hydraulic hose manufacturers, suppliers, factory, 28mm rubber hose, EN856 4SP Hydraulic Hose, Oil Extraction Hose, residential gas lines, rubber delivery hose, rubber irrigation hose










